FWIW - Morion made in St Petersburg, and company owned by Frequency Electronics Inc.
Rob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Green Sent: 22 September 2009 20:10 To: [email protected] Subject: [time-nuts] Morion MV89 Problem I got one of them from one of those Chinese eBay sources. Hooked it up, let it warm up,it does get rather warm to the touch. Problem is that I can't get it on 10 MHz. Even if I connect the control voltage input directly to the reference voltage out, it is still low by about 4 Hz. Another thing, the current jumps from about 800 mA to next to nothing, and back. I assume this is the outer oven kicking on and off. I kind of thought it would ramp up and down, not be either on or off. So, MV89 owners, is it bad? Has anyone ever sent anything back to China? _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
