Murray wrote:I have an MV89, and it draws about 320mA steady state. No cycling of the current at all once warmed up. The surface temperature is warm, but you can leave your hand on it.
Performance wise, the MV89 is very good. The ageing is particularly low - after only a week from power-up it's running at under 1e-9/day. By the way, my unit came direct from Russia, not epay. 73, Murray ZL1BPU Thanks Murray. I contacted the seller and he said he would send another if I paid the shipping. Seems fair enough. I found that the outer oven has stuck on. I disabled it and tried it to see how it did as a single oven. It takes a long time to stabilize but seemed quite stable. I turned it off a while then back on to see how it retraced. I will know in the morning. I know it probably won't work well this way since it was built as a double oven. I might play with it and either try to repair the outer oven controller or see if I can rig up my own outer oven control. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
