Hi David, thanks for the answer. effectively, at power on, i have a message : rom failed, but it seems to have no importance, since after actioning the run touch, it works well (why ???). Do you really need an image of the eprom ? perhaps i can do that, but is it interesting because the checksum of the eprom is not good! DPS-43DP what is it different from DPS-43DL? can't find it on web! 73 Alain F4GBC
----- Message d'origine ----- De : "David " <[email protected]> À : <[email protected]> Envoyé : vendredi 2 octobre 2009 00:49 Objet : Re: [time-nuts] upgrading agilent 53132 counter | | Hi Alain | | > i would upgrade my 53132 with an OCXO 10811, i have the | > module, but i was told i | > have to change the power supply too. | > It's yet the original HP 0950-2496 from Delta, model : | > DPS-43DL-2 (47 Watts). The remplacement type should be a HP | > 53132-60208 (from the HP doc) but i have | > not the model ref from the fabricant. | | I have a 54132 with the opt 012 'US OVEN'(OCXO 10811) and the 12.4GHz Ch3. | I've had a look at the PSU, it's the DPS-43DP-2, manufacturer is Delta I | think. I guess the unit was made in year 2000. I'd recommend that if you can | store an image of the eproms when you have it open, I've seen quite a few | reporting eprom errors on power up so I'm running on copies with the | originals and their images in storage | | Regards | David | GM4HJQ | | | | _______________________________________________ | time-nuts mailing list -- [email protected] | To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts | and follow the instructions there. | _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
