Tim, For 0.1 second gate time, my result is similar to yours. With my gate time set to 1 second, the "racking" drops to +/- 1E-10 (or less), for comparison.
Greg ----- Original Message ----- From: "swingbyte" <[email protected]> To: "Discussion of precise time and frequency measurement" <[email protected]> Sent: Friday, October 09, 2009 11:36 PM Subject: [time-nuts] hp10811 OCXO shipping jolt/drop survival? HI all , I had a 5370 A shipped to me that suffered enough of a drop/roll to break a handle and bend the chassis such that the bottom panel had to be modified to get it back on. When I connected the timebase output to the start input the frequency display is 10.0000000xx with the last two numbers moving about quite a lot. Could this indicate damage to the oscillator due to the drop? I haven't tuned up the inputs yet so this may be an artefact of that. Thanks Tim _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
