Take a look at the LT 6551 it makes a good four channel distribution amp. Bert Kehren In a message dated 11/12/2009 3:36:04 P.M. Eastern Standard Time, [email protected] writes:
Hi, The cheap alternative is to use a video distribution amp. Even the cheap ones are reasonable. VGA distribution units can also be used, you get three channels. Robert G8RPI. --- On Thu, 12/11/09, Richard W. Solomon <[email protected]> wrote: From: Richard W. Solomon <[email protected]> Subject: [time-nuts] 10 MHz Distribution Amp To: [email protected] Date: Thursday, 12 November, 2009, 18:20 A friend of mine is looking for an inexpensive way to distribute his 10 MHz T-Bolt signal to other instruments. The TAPR unit, while very nice, is a tad on the pricey side when you add in the enclosure. Any ideas what he could use that is not so expensive ? Thanks, Dick, W1KSZ _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
