For the CO-255 Series:
Holding the oscillator with the SMA connector up and looking at the bottom,
reading left to righ;
1. Supply (+)
2. Case
3. N/C (No connection)
gap
4. 0V, Case
and below:
5. Case.
By the way, the A17 series has a stability rating for =15C t0 +35C of +/- 1
part in 10,000,000.
Standard voltage is +15V @ <50mA for option R and output is >1.0Vrms/50 Ohms
(+13 dBm)
I can send the data sheet if needed.
John WA4WDL
--------------------------------------------------
From: <[email protected]>
Sent: Wednesday, November 18, 2009 11:22 AM
To: <[email protected]>
Subject: [time-nuts] Vectron Osc.
I have two Vectron Labratories CO-255A17-R 400 MHz Crystal Oscillators
that
I would like to use but have no information on. They are 2X3 inches 3/4
high SMA output and have five pins on the bottom, two are ground. Does
any
one have information. Thank you
Bert Kehren Miami
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
