--- On Sun, 29/11/09, Robert Atkinson <[email protected]> wrote:
From: Robert Atkinson <[email protected]> Subject: Re: [time-nuts] Trimble GPS RX info needed To: [email protected], "Discussion of precise time and frequency measurement" <[email protected]> Date: Sunday, 29 November, 2009, 11:28 Hi Tom, Sounds like a Palisade. I'm not able to look at one of mine at the moment to check the part number. I've attached a photo. Don't try to part the two halves of the case. While they do clip together, this is only to hold it together while a seperate epoxy joint sets. I've opened one up and distroyed the case in the process! Robert G8RPI. --- On Sat, 28/11/09, Tom Holmes, N8ZM <[email protected]> wrote: From: Tom Holmes, N8ZM <[email protected]> Subject: [time-nuts] Trimble GPS RX info needed To: "'Discussion of precise time and frequency measurement'" <[email protected]> Date: Saturday, 28 November, 2009, 22:09 Have obtained a Trimble P/N 23632-20 device which appears to be a GPS of the type often seen mounted on a pole at a cell site. A search of the web has not been successful in providing the connections or other info. The connector is a small 12 pin type, possibly an ITT/Cannon. The unit is housed on a plastic (for the purists, polymer) snap together case, which I have so far been unable to open, as it appears that all 8 tabs must be released simultaneously to accomplish that feat. Any help would be appreciated. Thanks. Regards, Tom Holmes, N8ZM Tipp City, OH EM79xx _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
<<attachment: palisade-sml.jpg>>
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
