Jan
This saga will never end - I have a Solartron 7060 which would appear to
have a different manufacturers IEC input socket/ ac filter, and to date,
after many hours running it has not produced the "essence". So, I guess its
down to the manufacturer of the input filter in (all ?) the 7150's and it
would seem the 7151's
Roy
----- Original Message -----
From: "Jan Fredriksson" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Saturday, November 28, 2009 9:16 PM
Subject: Re: [time-nuts] time-nuts Digest, Vol 64, Issue 96
The smell does depart over time - you should have use more isopropyl
alcohol
and been more patient :-)
A pity to loose one of those they are pretty rare.
I actually gave it to a friend who's nose is less touchy.
So it's in good use. And I have limited space and too much stuff.
You can often find these at Ebay UK for around $20-30
The Solartron equipment I had has been very stable. I had a
datalogger sent for calibration, ten years after
the initial calibration and it had deviated by no more than
1 unit on the last digit, in several ranges, zero change.
Jan
--
Jan Fredriksson
http://www.41hz.com
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
