Hi guys, I wonder if anyone has ever replaced the 1PPS output of the oncore with an external 1PPS from say an M12M receiver. I would suspect all else being the same that the Z3801A would work much better, and not have the problems Mike is seeing? bye, Said In a message dated 12/2/2009 04:46:58 Pacific Standard Time, [email protected] writes:
You can see that the EFC immediately tries to follow the value calculated during the incident, regardless of any historical data the box is holding, if any. I haven't yet checked to see how much the violent swing in EFC effects the 10MHz output, but I suppose there must be some. I have tried 2 different VPs , but they appear to be suffering the same issue. Both have different firmware levels. Anyone seen this and know of a way of limiting the effect? I have thought about moving the Z3801A to my south balcony, where I shouldn't see so many reflections, or better, to the appartment roof, but that needs permission from the management. Mike _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
