The Loop Head transmitter is I think (It may be a new one) running from Anthorn (after being shipped up from Rugby) on the south bank of the Solway Firth. Dont forget there is a slave near Bordeau, Susstons (??)on the St Malo peninsula. The Megapulse web site data should be OK for the Lessay chain but perhaps not for the Anthorn slave. Lessay is a dual rate with the Sylt Chain. I dont think Anthorn is dual rate.
Alan G3NYK --- On Wed, 16/12/09, Poul-Henning Kamp <[email protected]> wrote: > From: Poul-Henning Kamp <[email protected]> > Subject: Re: [time-nuts] Loran C question > To: "Discussion of precise time and frequency measurement" > <[email protected]> > Date: Wednesday, 16 December, 2009, 23:04 > In message <[email protected]>, > [email protected] > writes: > >Hello! > > > >Someone on this list can tell me, please, the exact > geographical position > >of the Yankee/Lessay 6731 Loran C station ? > >At my position (+41.353; -8.384)I am measuring an > average delay of > >32,495.87 microsec. along the day and IMHO this can't > be the under > >construction > >(and apparently never operational) LOOP HEAD station. > > Loop Head never happened, but the British are transmitting > at least > a 7499 slave from somewhere in the UK. Not sure if > the dual-rate > ton 6731 also. > > Megapulse.com used to have the most up to date list of > Loran data > but it seems to be out of date with respect to European > stuff now. > > Poul-Henning > > -- > Poul-Henning Kamp | UNIX > since Zilog Zeus 3.20 > [email protected] > | TCP/IP since RFC 956 > FreeBSD committer | BSD > since 4.3-tahoe > Never attribute to malice what can adequately be explained > by incompetence. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
