In the longago deepdark past, I used routines from something called Numerical Recipes. Someone out there may have a copy... Don
Mark Sims > > Hello Bruce, > > Yes, there are all sorts of pregnant packages and web sites that will > solve the problem in a jiffy. But LAPACK, for instance, is over 45 > megabytes long. > > What I am looking for is a targeted solution to the problem... a routine > or set of routines that I can drop into Lady Heather with a minimum of > muss and fuss that will spit out those two magic numbers. > > The idea is to collect data for a while, press a key, and Heather will > characterize your oscillator. I have code in there that does this if you > have the active temperature control working (stabilize temperature to get > osc drift rate, slew temp to get osc tempco). I would like to be able to > do it for the more general case where the unit is not under temperature > control. > --------------------- > Try one of the Lapack derivatives such as clapack, Lapack++ etc > However you will need the optimised BLAS as well. > _________________________________________________________________ > Hotmail: Trusted email with powerful SPAM protection. > http://clk.atdmt.com/GBL/go/177141665/direct/01/ > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- Dr. Don Latham AJ7LL Six Mile Systems LLP 17850 Six Mile Road POB 134 Huson, MT, 59846 VOX 406-626-4304 www.lightningforensics.com www.sixmilesystems.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
