Bruce Dave G4HUP (a "local") has family members in the States and attends several of the Microwave events like MUD and Dayton. I think he monitors this group so you may get a reply eventually (we are deep in an unaccustomed snow blanket at the moment, and as he lives a little remotely, he may have other priorities just now)
Alan G3NYK --- On Fri, 8/1/10, [email protected] <[email protected]> wrote: > From: [email protected] <[email protected]> > Subject: [time-nuts] Multiplying 10 MHz to 100 MHz > To: [email protected] > Date: Friday, 8 January, 2010, 20:18 > In an earlier post I mentioned that I > had been searching on-line for ideas > to multiply a 10 MHz signal to 100 MHz. I would like > to multiply the 10 > MHz outputs of an LPRO and a Thunderbolt GPS to feed to 10 > GHz phase-locked > microwave sources so their outputs can be fed to a mixer > for enhanced > frequency comparison. > > F4GBC kindly provided the following link for an article in > French. > > HI all, > > have a lok to : > http://pagesperso-orange.fr/f5cau/ol_shf/OL9HX.pdf > > very interesting for those who read french. > Alain > F4GBC > > After looking at the article I searched on-line for the > part number of the > specified 100 MHz filter and found a link to an English > language version of > the article _http://g4hup.com/DFS/F9HX%20synthe%20english.pdf_ > (http://g4hup.com/DFS/F9HX%20synthe%20english.pdf) > , should anyone be interested. > > Bruce Hunter, KG6OJI > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
