The lightbulb wattage can be selected accordingly to limit the current as needed.
You'll notice if you dead short the seconday, the light bulb will glow brightly, but that you won't be lighting your MOT on fire like you would if you had no current limting. Sent via BlackBerry by AT&T -----Original Message----- From: Bob Camp <[email protected]> Date: Sun, 17 Jan 2010 20:33:16 To: Discussion of precise time and frequency measurement<[email protected]> Subject: Re: [time-nuts] 4 KV Power Supply Recommendations Hi You also could leave the windings as is and feed the secondary voltage into a voltage multiplier. Still not very safe to wire up. If you did wire it up, the available current would be pretty massive. I certainly would not attach it to an ion pump I cared about. Bob On Jan 17, 2010, at 6:53 PM, Stanley Reynolds wrote: > > > > > ----- Original Message ---- > From: Chris Stake <[email protected]> > To: Discussion of precise time and frequency measurement <[email protected]> > Sent: Sun, January 17, 2010 5:05:01 PM > Subject: Re: [time-nuts] 4 KV Power Supply Recommendations > > What is the operating voltage of the magnetron in a domestic microwave oven? > Although VERY HAZARDOUS, it might be possible to adapt the PSU from an old > one? > Chris Stake > > Yes, if you remove the transformer shunts and the filament windings and add > more primary windings in the space you would get about 2700v with a full wave > bridge. You also need to lift one side of the secondary that is grounded to > the frame. Yes very dangerous and yes I'm luck to be able to tell. > > Stanley > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
