It is barely visable on the Tektronix 485. Best regards, Sal C. Cornacchia Electronic RF Microwave Engineer (Ret.)
The information contained in this e-mail transmission is privileged and/or confidential intended solely for the exclusive use of the individual addressee. If you are not the intended addressee you are hereby notified that any retention, disclosure or other use is strictly prohibited. If you have received this notification in error, please immediately contact the sender and delete the material. ________________________________ From: David C. Partridge <[email protected]> To: Discussion of precise time and frequency measurement <[email protected]> Sent: Sun, February 7, 2010 10:52:03 AM Subject: Re: [time-nuts] No 1 PPS output on a Tbolt IIRC the pulse on the 1pps output of the TBolt is very narrow, so it is pretty easy to miss. You may need to use a pulse stretcher to see it. Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of SAL CORNACCHIA Sent: 07 February 2010 15:45 To: Discussion of precise time and frequency measurement Subject: [time-nuts] No 1 PPS output on a Tbolt Can someone help with a Tbolt 35757256 built 6/2/05 A002206,G1 Rev E, I have built a power supply and acquired a GPS Antenna and got it assembled and appears to be working properly except for the 1 PPS output, (NO OUTPUT MEASURABLE) I would appreciate any help possible. Thank You, Sal C. Cornacchia Electronic RF Microwave Engineer (Ret.) _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
