A full wave rectified sinewave has only even harmonics present.
Bruce
Max Robinson wrote:
If you start with a square wave odd order is all you can get but if
you start with a pulse with a 25% duty cycle you can get even order.
It's best to optimize the pulse width for the harmonic you want.
Regards.
Max. K 4 O D S.
Email: [email protected]
Transistor site http://www.funwithtransistors.net
Vacuum tube site: http://www.funwithtubes.net
Music site: http://www.maxsmusicplace.com
To subscribe to the fun with transistors group send an email to.
[email protected]
To subscribe to the fun with tubes group send an email to,
[email protected]
----- Original Message ----- From: "Nick Foster" <[email protected]>
To: <[email protected]>
Sent: Tuesday, February 09, 2010 6:35 PM
Subject: Re: [time-nuts] Low phase noise VCO
From: [email protected]
To: [email protected]
Date: Tue, 9 Feb 2010 18:24:39 -0600
Subject: Re: [time-nuts] Low phase noise VCO
Which leads me to ask a novice question:
Why not pull a 16 MHz crystal and multiply to 64 MHz?
If you count down from 64 to 10 MHz, isn't the multiplication inside
the
PLL?
Perhaps the noise is multiplied by 4, but would it work for the
intended
purpose?
Bill Hawkins
Can you do x4 multipliers? I thought odd-order harmonics were usually
used for multipliers. I'd be happy to be wrong!
Nick
_________________________________________________________________
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
