On Thu, Feb 11, 2010 at 09:40:19PM -0800, Scott Burris wrote:
> The GC-1000 keeps declaring the decoding to be invalid partway
> through each minute.
> Dean's synthetic WWV gets decoded perfectly and the display turns
> out after 3 complete
> minutes. But the 100Hz level in the synthetic sounds high to me.
> Since your recording
> fades in and out (just like I hear it in LA!), I need to figure out
> if the clock is
> having trouble pulling the 100Hz tones out, or if the recording just
> fades too much.
There was a lot of fading present; possibly too much for the
receiver to work with.
Try this recording instead:
http://puck.nether.net/~majdi/WWV-10MHZ.wav
Still some of the usual fading, but not nearly as bad as the
other night.
--msa
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
