Hi neville:
My old Gibbs rack mount 5 MHz standard used the LM723 linear regulator.
I believe it's one of the lowest noise regulators you can use.
http://www.national.com/mpf/LM/LM723.html#Overview
Have Fun,
Brooke Clarke
http://www.PRC68.com
Neville Michie wrote:
Hi,
I remember a reference, probably by Bruce, that LEDS provide a low
noise voltage reference.
I am proposing to build a voltage regulator for a thermally controlled
LPRO rubidium oscillator,
with the voltage regulator being mounted on the 0.5 inch thick
aluminium heat sink plate.
The LEDS would also be mounted on the plate, which has controlled
temperature.
The LPRO has internal voltage regulation, and by running it at ~40C
and 18Volts, the thermal
flux within the unit is minimised as is the power demand.
What I want to know is if a LM317 running on a stack of LEDs driven by
the LM317 output
would provide a low noise power source? What would be better?
cheers, Neville Michie
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
