Hi The D series shell with multiple "normal" inserts is the solution I've seen a lot of.
Bob On Feb 27, 2010, at 10:54 PM, jimlux wrote: > Bob Camp wrote: >> Hi >> Sure never seen any of them on any gear in my junk pile. >> I also never seen a customer ask for them as an output connector on an >> oscillator. I wonder how common they actually are. >> Bob >> On Feb 27, 2010, at 9:59 PM, Bruce Griffiths wrote: >>> Actually there are miniature twinax style connectors, for example: >>> http://www.amphenolrf.com/products/twinbnc.asp?N=0&sid=4B8860805409E17F&; >>> <http://www.amphenolrf.com/products/twinbnc.asp?N=0&sid=4B8860805409E17F&;> >>> >>> Bruce >>> >>> Bob Camp wrote: > > > There's a variety of these kind of things. You see them in MIL-STD-1553B > systems, among others. Triax is also fairly common as a connector for > "shielded twisted pair". There are also twisted pair inserts for the DB-25 > sized shell (actually a quad pair with 4 inserts). > > The one that has one pin and one socket on each side is a much better > strategy than the one that has 2 pins on one connector and 2 sockets on the > other. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
