Hello Group members, I need some help interpreting Lady Heather software results like the colours and chart results for My Tibold GPS Receiver, any help would be appreciated as I am new at this. Best regards, Sal C. Cornacchia Electronic RF Microwave Engineer (Ret.)
________________________________ From: Bob Camp <[email protected]> To: Discussion of precise time and frequency measurement <[email protected]> Sent: Sun, March 7, 2010 8:05:25 AM Subject: Re: [time-nuts] Advice on TRACOR 527E Hi On the site - also grab the 527A manual. It's the one with the schematics in it. It also has a complete listing of the FSCM numbers as of 1967. Useful for figuring out "who made that" questions when repairing military surplus gear ..... One thing you will run into on the 527 - They originally came out in the era of 5 MHz standards. The specs on the boxes only list 100KHz, 1 MHz, and 5 MHz as valid inputs. In reality, they will accept anything that's an integer sub-multiple of 5 MHz as an input (2.5 MHz, 1.66666 MHz, 500 KHz ...). The front end is an injection locked multivibrator. Check to see how happy yours is with a 10 MHz input. Most will run with 10 MHz and some multiples of 5 MHz sub multiples (like 5/2 x 3 = 7.5 MHz). If enough people have them, we can start a thread on correctly computing the Alan Variance from 100 foot long strip chart's. So much fun, ink all over the place .... Bob On Mar 7, 2010, at 6:32 AM, olivier MEHEUT wrote: > Thank you so much for all replies. > > Good reading for this sunday. > > > 73, Olivier F6HGQ > > > Le 7 mars 10 à 12:05, [email protected] a écrit : > >> >> In a message dated 07/03/2010 10:17:54 GMT Standard Time, [email protected] >> writes: >> >> Could not locate any O&M manual on the web for this equipement >> can somebody help ? >> ----------------- >> Once again Didier saves the day:-)..... >> >> _http://www.ko4bb.com/cgi-bin/manuals.pl?dir=09%29_Misc_Test_Equipment_ >> (http://www.ko4bb.com/cgi-bin/manuals.pl?dir=09)_Misc_Test_Equipment) >> >> Look towards the bottom of the page, no diagrams in the 527E manual >> unfortunately but the 527A manual that's also there does have diagrams so >> that >> might help, and much other interesting stuff to keep you distracted too:-) >> >> regards >> >> Nigel >> GM8PZR >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
