Well just to get the conversation really going. In the US we have a store called home depot and they and others carry TV antenna splitters with DC pass through on one leg good to 2.5 Ghz for about $10. Been using one for at least 2-3 years works just fine. Certainly this is evil and suspect I will here about it. But it sure works. Additionally I use 75 ohm TV coax cable from the tower to my systems some 50 odd feet. This is 1/2" hardline very low loss. Available from cable tv companies for $0. So my hole feed system is 75 ohm with a swr of about 1.4-1 due to the impedance mismatch. Pretty darn good. Good luck
On Fri, Mar 26, 2010 at 4:09 PM, Ruifeng Xi <[email protected]> wrote: > Hi, Ashley > > Only used ones? Otherwise, check > > http://gpsnetworking.com/GPS-antenna-splitters.asp > > You can find two way, four way splitter with/without External Power Supply. > ...... > > > > On 3/26/2010 3:47 PM, [email protected] wrote: > >> Hi Everyone........ >> After a lot of learning, sweating (yes, girls do sweat), hand >> wringing, and a LOT of emails and great help , we have two of Mr Miller >> (G3RUH) GPSDO units up and working fine. Disciplined 10mhz all over the >> place. >> >> Now what we need is a GPS antenna splitter..... Soooooooooooo, we're >> looking for links, do-it-yourself articles, hints from you guys who have >> built them...... Ebay is really barren for these things, only one or two >> listed, but I thought we would try Time Nuts first and see ........... >> >> Thank you everyone for all of your help with this GPSDO project !! >> >> Ashley >> >> >> >> >> >> Thank You >> Kiss-Electronics >> Ms Ashley Hall >> 183 N 5th Avenue >> Cornelius, Oregon >> 97113 >> >> >> W7DUZ >> >> >> www.kiss-electronics.com >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> >> > > > ========================================= > Ruifeng > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
