Neville Michie-"The whole aim of this exercise was to be able to
support the Tbolt with a 12 volt lead acid battery (20AH) and so
have an uninteruptable power supply."
I chose a different route. I bought a small DC-DC converter that runs
from +9 to +18 in and has 3 outputs of +5/+12/-12. The efficiency is
quite high and allows a wider operating range on the input. I haven't
put this together and tested it as a complete package yet but using
the DC-DC converter keeps it simple. I know a lot of people would try
to avoid the DC-DC switchers but for what I'm doing they work fine.
You do have to be very careful with filtering and grounds on the supply.
Lucent used DC-DC converters in the RFTG series of GPS/XO/Rb
units they made And the Thunderbolt "E" series dis as well.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
