Jeff,
Based on the completed prices on Ebay, you may want to consider getting it repaired by Agilent. The cheapest on Ebay
was $2000, and it went up from there. I can also give you a few cal labs that do repairs as well.
Bob
----- Original Message -----
From: "Robert Benward" <[email protected]>
To: "Discussion of precise time and frequency measurement" <[email protected]>
Sent: Monday, June 07, 2010 8:54 PM
Subject: Re: [time-nuts] HP 3458A schematic/service manual request
Hi Jeff,
I checked the Agilent website, and I assume you did also. There is no schematic to be had. What I have discovered
with Agilent, is that certain instruments are made by particular divisions. Some of those divisions consider those
schematics to be proprietary and they will not release them now, not in the near future, and may never be released. I
ran across this with an LCR meter I bought on EBAY. I tried to get schematics, as I thought he repair would be
relatively simple. It passed self test, appeared functional, but very erratic. I thought the problem would be within
the first few components near the front end.
I called the factory more than once, but the line I got was exactly what I described above. I looked everywhere, but
to no avail. I hope you have better luck than I did. Maybe you can find a parts unit on EBAY cheap.
Bob
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Monday, June 07, 2010 7:26 PM
Subject: [time-nuts] HP 3458A schematic/service manual request
Hi,
I picked up a non-working 3458A at a swapmeet this weekend.
It has err "202 Hardware Failure : Slave test-convergance".
"Assembly-Level Repair Manual" says its a problem on the A1 board
Does anyone have a schematic/service manual for this?
Thanks
Jeff
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
