I have a FTS 4060 Caesium Frequency Standard that I never managed to get
working properly.
When powered on, it locks properly after some 10 minutes and keeps
running until it jumps off by about +1E-7. That is, the 10 MHz output
then reads 10,000,001 Hz, and the red alarm light is on.
When I tried it yesterday again, it worked for about 2 hours before the
shift appeared. Oddly enough, the green 'Locked' light was still on.
This happens every 2...20 hours.
Any ideas what could cause that failure?
Adrian
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
