This is pretty funny... I could read this stuff all day - oh, wait - I DID read this stuff all day...
------------------------------ Message: 2 Date: Fri, 18 Jun 2010 12:58:20 -0700 From: "WarrenS" <[email protected]> Subject: Re: [time-nuts] Advantages & Disadvantages of the TPLL Method To: "Discussion of precise time and frequency measurement" <[email protected]> Message-ID: <46d1d90dd05b4f0e95f365b53a6dd...@warcon28gz> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Charles posted > its operation needs to be characterized if technically oriented folks are > to be expected to take you seriously. If a simple BB that works as well as that one, does not already do that, then nothing else I'm able or willing to do or say is going to change much. It is a good thing that people can accept things when shown that they work, even when they do not fully understand how. Or else there would no acceptance of much of anything including gravity, computers, email, women or Windows. So your point is? and why do you think I care? Maybe you are missing the point of my intended audience. After all, I'm not the one that is lost or the one that does not know now it works. I have a working unit that, I know how it works and how to test it. > how you determined phase locking down to femtosecond levels, & ... You do indeed have many valid technical questions that I'd try and explain in a way that you could understand, IF my goal was still to try and educate you, or if I thought there was ANY chance I'd be able to do so. You seem to again of missed the point of my last answer, One with enough technical ability can see what John's data says from his noise floor measurements. But If you do not understand that or how I'm doing it by measuring the PD output, then I can not teach or show you how, even if I still wanted to try. My past failed attempts prove that. So I'll just continue to do what I do best, and that is to make and test TPLL BBs for myself. If you were thinking that I am one that can or am willing to try and teach you basic or advanced anything, then you are greatly over estimating my abilities and/or my patience. You need to look else where if you want to read a fancy math paper on how and why this all works or how to measure it. If you can't find one to your liking and still want to know how to measure fs stuff, I'm sure if you ask nicely in a new thread, others would be more than willing to help you out with something that you could understand and accept. Then again if I missed your point and your only goal is to verify if I now how to do it, then I can save you some trouble, Yes the TPLL and I know how to measure fs phase differences, and we both know how to integrate along with a lot of other basic things including even adding two plus two. (and I doubt that you understand that last point either, & Don't take it so personal, It is likely not just your problem) BTW, one of the other points you seem to be missing in how I can measure & test things so easy that others can find so hard to do. After all I do have a big advantages over most, I can use another one of my GP PLL BB as a tester. As I've point out before, they can do much more than just ADEV. But then you would not be expected to know that without an advantage list. **** Seems like it is again 'Time to Push the Reset.Button' on this thread's subject, cause this has got way off the subject. As long as it is so far off the subject of advantages & disadvantages, I'll add, in response to what others have said both on and off line. IF others want to build a TPLL using buffer amps, or VFC, or difference Ref Osc, or multiple Ref osc, or a digital version or with cross correlation, or using different software, or different algorithms, or different connectors, or more parts, or more expensive parts or cheaper parts, or that works better with some imaginary unreal data set, or over a wider freq range, or over a longer tau, or at a lower level, or with less injection locking, or any of the other thing's that have been brought up, by all means, Go for it. I've tried to encourage others to do it their your own way. No single solution is best for all situations. What several of the suggestions show is that many do not yet know how simple a TPLL can be made or do they even understand exactly how the 3 basic parts work together. I have consider all the suggestions and tried many of them and so far have found the variations unnecessary for my applications. Also I have not heard about any H/W that others have built, only a lot of criticism from some about what I've done or said or not said. No problem, If others do not like what I've done or the way I've done it or tested it, even when many of them do not know what it is or how it works, by all means they should do it there own way. What I've done is to test one of my simple TPLL versions and show that it's performance is good enough to be limited by the OCXO. That is all, Don't read more into my comments than that. The simple TPLL does not go down to 1e-15. What I said is that is the limit of the low cost AMP that I choose, and it insures the amp has no significant negative effect. Of course all is not perfect, nor is this is the best that a TPLL can be made, not even close. But it is good enough for me. I know how to made it better, much better, with lower noise, more resolution, faster, lower tau, smaller or bigger, more costly or lower cost, and on & on. So what?, the achieved goal of 'KISS' was to keep it small, simple and low cost, and make it good enough to test the high end OXCOs that are available. This simple $10 version (my ebay cost) of a TPLL tester using just a single powered active part (not counting the Ref or the ADC or the PC) has plenty of limitations but it has been show to be good enough to closely match a TSC 5120A over a wide range of signals. By all means if your needs, skill levels, experiences, desires, goals, and junk boxes are different than mine, and you want to make something different or better, then by all means 'Go For It'. I'm not trying to tell anyone what method to use, or what they should build or how to build one OR how to test it. I'm just trying to get a list posted to show the many unknown advantages and disadvantages of the TPLL methods. Because so few have had any experience with this method and therefore have little or no practical knowledge about it. How can one go about deciding it is something is useful for them without knowing what the advantages and disadvantages are? ws _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
