At 04:19 PM 6/23/2010, Leigh L. Klotz, Jr. WA5ZNU wrote...
If you have these values we can document the rest of this process in
one
place.
10 MHz sine TTL
L1 ?.? uH L1 OMIT
L2 1? uH Replace with R23 130 OHM 1 WATT
R16 ?10 OHM NOM 100 OHM NOM
R17 1.0K 274 OHM NOM 1/4W
R18 1.0K OMIT
C8 47pF NOM JUMPER
C9 6800pf NOM 0.47 uF NOM
C16 0.1uF [1uF: see above] JUMPER
C17 240pF NOM NP0 OMIT
INSTALL JUMPER A-0
Here are the values I used.
L1 6.8 uH
L2 15 uH
R16 910 Ohm nom
R17 1.0K nom
R18 1.0K
C8 47 pF nom
C9 6800 pF nom
C16 0.1 uF (but 1.0 uF provides much cleaner signal)
C17 240 pF NPO nom
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
