Hi Bob;
When I can buy one of those programmers that runs on the MAC OS,
please let me know.
I would much prefer to offer a fellow enthusiast $20 to provide a
programmed chip then get involved with Windows (even if it would open
the opportunity for Lady Heather...humm). I get too much exposure to
it at work to be willing to bring such suffering home. Sadly, I
cannot use my work machines for anything along these lines or this
would be easy.
I do have a DOS machine...an LX200.
Tom Frank, KA2CDK
On Jul 5, 2010, at 9:35 AM, Bob Camp wrote:
Hi
One thing to consider:
If you Google "PIC Programmer" there are a number of hits for sub
$20 gizmos that are everything you would ever need as the hardware
is concerned. The programming software is a free download off the
Microchip site. It runs on any and all Windows operating systems.
Programing parts is pretty simple and essentially foolproof. PIC's
are pretty common, so you probably will use the programmer again.
On a similar note - I would put the PIC on the board in a socket.
If there are future software enhancements, the chip will need to be
pulled to be re-programmed.
Bob
On Jul 4, 2010, at 11:36 PM, Thomas A. Frank wrote:
I'd like to make the same request.
Thanks!
Tom Frank, KA2CDK
On Jul 4, 2010, at 7:55 PM, James Robbins wrote:
Is there anyone here in the US who can offer the 16f688 chips for
sale and/or provide programming for the chips? All associated
costs would be paid, of course. Many thanks.
Jim Robbins
N1JR
[email protected]
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
