Hi The real question somebody needs to answer is - will it work with side adjust trimmers? If not, then we're going to have to find another source to get the trimmers from.
The project on Mouser shows the 3266p trimmer. AFIK the correct part is the 3266w. The board also appears to be laid out for the 3266y. Another alternative is the 3266x. All the details of what's what are at: http://www.bourns.com/data/global/pdfs/3266.pdf My guess is that the 3266p isn't going to work. The 3266y is even harder to get than the 3266w. The 3266x looks problematic when you go to do the adjustment Rational solutions: 1) Jameco shows the 3266w as "ships today" in 5 K ohms. Who knows how many they actually have.... 2) 3266w is available in the 2K ohm flavor at Mouser (lots in stock). If you change R16 and R23 to 1K ohms, the 2K pot should work fine. That makes them the same value as R5 and R6. One fewer line item ... I'd vote for option 2. Bob On Jul 8, 2010, at 2:55 PM, Lester Veenstra wrote: > Safe to get in the water yet? > > > > Lester B Veenstra MØYCM K1YCM > [email protected] > [email protected] > [email protected] > > > US Postal Address: > PSC 45 Box 781 > APO AE 09468 USA > > UK Postal Address: > Dawn Cottage > Norwood, Harrogate > HG3 1SD, UK > > Telephones: > Office: +44-(0)1423-846-385 > Home: +44-(0)1943-880-963 > Guam Cell: +1-671-788-5654 > UK Cell: +44-(0)7716-298-224 > US Cell: +1-240-425-7335 > Jamaica: +1-876-352-7504 > > This e-mail and any documents attached hereto contain confidential or > privileged information. The information is intended to be for use only by > the individual or entity to whom they are addressed. If you are not the > intended recipient or the person responsible for delivering the e-mail to > the intended recipient, be aware that any disclosure, copying, distribution > or use of the contents of this e-mail or any documents attached hereto is > prohibited. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
