Hi Don, sorry about the hassle, please see the attached image of a Fury GPSDO PCB. C67 is on the bottom side of the PCB. The hole is one of the five mounting holes of the OCXO, close to the edge of the PCB, next to one of the SMA connectors. I drew a white circle around it. You can solder the two thermistor wires simply across that capacitor (the other side of the cap is connected to ground), or you can connect one wire to the hole next to C67, and the other wire to a ground post on one of the connectors. Hope that helps, Said In a message dated 7/28/2010 09:19:58 Pacific Daylight Time, [email protected] writes:
Said, I would like to take advantage of the Fury TempCo capabilities when using an Rb. I have been looking for the thru-hole pad which you say is next to C67 but I can't find a C67. Consider that I am over 60 and eyesight is challenged but I have found C68 with nearby pads. Can you give us some additional components nearby to zero in on this allusive component. Thanks! Regards... Don
<<C67.jpg>>
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
