Thank you Brooke I have only been with this group for a year so I am not aware of all past dialog. What has been the result driving the PRS10 with an external source and was it a GPS or a Tbolt? I am not trying to be cute but if there is an alternative with test data I would like to buy one and compare it with what I presently have. If I am repetitive I shut up, but the proliferation of Rb's it makes sense to lock them to GPS, listening to some new members. To day Rb's are cheaper than good OCXO's! Bert Kehren In a message dated 7/29/2010 2:16:01 P.M. Eastern Daylight Time, [email protected] writes:
Hi Bert: The PRS10 can use it's external 1 PPS input two ways. 1) as the input for a GPSDO, or 2) Time Tag (RS-232 command TT) of the input pulse http://www.prc68.com/I/PRS10.shtml Have Fun, Brooke Clarke http://www.PRC68.com [email protected] wrote: > Arnold > Have you actually done it with the PRS10 and what was the result? > Bert > > > In a message dated 7/29/2010 1:52:08 P.M. Eastern Daylight Time, > [email protected] writes: > > No problem for the PRS10 - there is an external pps input. > > For the FRK-RbO I don't have a practical solution yet, > because I don't have a manual with circuit diagram found > for this 5 MHz model. This RbO is actually running free, > drift controlled by an external resistor set by two 10 turns > potentiometers. I think it should be possible to inject a > current instead. The control by eg. the Shera controller > need some modifs for this purpose which I have not yet done. > The time constant need to be modified too I think. > > Arnold > > Am 29.07.2010 18:09, schrieb [email protected]: > >> Arnold >> how are you controlling the Rb with the Tbolt? Bert >> >> >> In a message dated 7/29/2010 11:10:16 A.M. Eastern Daylight Time, >> [email protected] writes: >> >> Bert, >> I'm using at the moment a thunderbolt (with spare for testpurposes >> using ext. other oscillators), a nice PRS10, a FRK-HLN-1A (5MHz with >> external doubler to 10 MHz) and several HP10811. >> I would like to build up with this a good and reliable reference >> (PPS and Frequ.). My dream would be a good autonom. TIC with timestamp >> possibility. At the moment the 53132A is doing a good job, but I miss >> the time stamp possibility and single measurements at defined time >> steps... >> regards >> Arnold,DK2WT >> >> >> Am 29.07.2010 13:50, schrieb [email protected]: >> >>> Arnold >>> what do you use? Bert Kehren >>> >>> >>> In a message dated 7/29/2010 7:02:06 A.M. Eastern Daylight Time, >>> [email protected] writes: >>> >>> I do, and I am also interested on other improvements! >>> >>> Regards, >>> Arnold >>> >>> >>> Am 29.07.2010 12:49, schrieb [email protected]: >>> >>>> Hi >>>> I think it would be nice to have a show of hands as to how many are >>>> >>> locking >>> >>>> a Rb to GPS and what they use. >>>> Bert Kehren >>>> >>>> >>>> In a message dated 7/29/2010 4:00:31 A.M. Eastern Daylight Time, >>>> [email protected] writes: >>>> >>>> In message<60eb5e7c69594f49b830463dc322e...@athlon>, "Ulrich >>>> >> Bangert" >> >>> >>> >>>> writes: >>>> >>>>>> Uhm, isn't this exactly where you want to use the >>>>>> still-smelling-like-brand-new-car PICTIC II with a good DAC >>>>>> and a microcontroller ? >>>>>> >>>>> I guess the PICTIC II is not very good when stop pulses arrive >>>>> >> BEFORE >> >>>> start >>>> >>>>> pulses which is a normal condition if a average time interval of >>>>> >> zero >> >>>>> between local pps and GPS pps is the aim. >>>>> >>>> So configure it to use a standard offset of one Xtal/Rb period ? >>>> >>>> >>>> >>> >>> >> >> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
