Add C4 for doing the cutting and it's job done!
Steve
WB0DBS
On Mon, Aug 23, 2010 at 1:54 PM, Mark J. Blair wrote:
On Aug 23, 2010, at 11:29 AM, Pieter ten Pierick wrote:
I would just use an axe for that, much less precise };-P
And of course for the measuring I would use a laser interferometer
based
system, with nm precision!
I suggest replacing the chalkline with one of those inverted spray
cans for painting markings on the ground, then. Because the chalkline
string would block the laser beam.
--
Mark J. Blair, NF6X Web page: http://www.nf6x.net/
GnuPG public key available from my web page.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
