P.S. There's a better description (in an article by Bernie Oliver) at: http://www.hpl.hp.com/hpjournal/pdfs/IssuePDFs/1961-03.pdf
Greg ----- Original Message ----- From: "Greg Burnett" <gb...@comcast.net> To: "Discussion of precise time and frequency measurement" <time-nuts@febo.com> Sent: Tuesday, October 12, 2010 2:07 PM Subject: Re: [time-nuts] Subject: Re: Meter face for HP-4805A Yeah, I remember from the "good old days", we individually calibrated taut-band meter movements with a HP designed servo-meter calibrator. At least that's the way we did it for some models. I don't guarantee we did it that way for all models, though. The way I remember it, this process (regardless of which division's instrument was involved) was performed at HP Loveland. Disclaimer: My memory might be slightly skewed after all these decades. For description of the taut-band meter movement calibration, see the HP Journal article at: http://www.hpl.hp.com/hpjournal/pdfs/IssuePDFs/1966-01.pdf I do agree with the other post, though, that *any* saved/scanned scale is way better than no (or a damaged) scale. In many cases probably a randomly scanned scale would match a given meter movement good enough for most our purposes. Greg ----- Original Message ----- From: <gsteinb...@aol.com> To: <time-nuts@febo.com> Sent: Tuesday, October 12, 2010 9:11 AM Subject: [time-nuts] Subject: Re: Meter face for HP-4805A Just a quick note... HP was quite proud that scales for their precision meters were individually produced for each movement on a custom made servo controlled photographic calibrator. An archive might be nice but won't provide the meter accuracy of the originals produced for each unit. Jerry . _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.