Ed Palmer wrote:
Sorry, the picture was too big. Let's try again.
http://s701.photobucket.com/albums/ww18/edpalmer42/main/?action=view¤t=DSCI0107.jpg
Ed
Arthur Dent wrote:
Ed Palmer wrote:
"I have an HP105B e/w a 10811-60109 oscillator. It has the same
physical configuration as all other plug-in 10811s. It's plugged
into the 00105-6044 board that you mentioned. This combination was
also apparently used in the 5061B Cs standard. You can see it in
the pictures in the manual. I also have a couple of the older
00105 oscillators. Totally different physical configuration
compared to the 10811 / 6044 combination, but the two are
plug-compatible."
Here is a photo of a 10811 (with a 5061 p/n) and the HP 105
oscillator that I just bought. They are not plug compatible.
http://farm5.static.flickr.com/4153/5094715304_90206b98fd_b.jpg
-Arthur
My mistake. I should have said that the older 105 oscillator is
plug-compatible with the combination of the 10811 and two add-on
boards. The first is the 00105-6044 board that you mentioned. It
includes voltage regulation and oven monitor circuitry. Both the
10811 and the second board plug into the 6044 board. The second board
is 05061-6165. It includes frequency divider, amplifier, and level
adjust circuitry to make it plug-compatible with the older
oscillator. Here's a picture of that board. Notice the 4 SMB
connectors and the four single lead connectors - just like the older
oscillator. The 110 VAC heater on the old oscillator isn't needed
with the 10811 so they didn't duplicate that.
Ed
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
