What's the battery nominal voltage supposed to be? -John
========== > Hi everyone! > > My SR620 is giving me an error 3 on power up. The manual says it's most > likely a dead backup battery. > > I can clear it if I hold down the reset button while powering up. (This > loads the factory defaults into the RAM.) > > However if I cycle power the error 3 comes back! > > The battery reads 3.44VDC and at the VCC pin of the Ram you get 3.20VDC > with the AC power off. > > This seems to indicate the battery is good. > > I'm thinking of placing a 1K resistor across the battery to see if a load > will cause a big drop. > > Any suggestions? > > The RAM is a CXK58257AP-70L. > > Thanks, > > Corby Dawson > ____________________________________________________________ > SHOCKING: 2010 Honda Civic for $1,734.09 > Is this price real? YES! We reveal the TRUTH! > http://thirdpartyoffers.juno.com/TGL3141/4cc60781dcc8a5aca4m04duc > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
