Mike, IIRC you link: /dev/oncore.pps.0 to /dev/elan-mmcr
But then you also need to maybe set a flag to make sure it triggers on assert (and not clear)? > I'm putting together an NTP server on a Soekris NET4501, using an > Oncore M12+. I can't get the Atom PPS refclock to load, it reports > "refclock_atom: time_pps_create failed: Inappropriate ioctl for > device." (/dev/pps0 is linked to /dev/elan-mmcr) I'll email you directly my build files for my NanoBSD (I built it with 6.3 & 7)... If you want to give NTPns a try I have a couple images ready to go (will fit on a 256MB CF or larger) http://www.rabel.org/ntpns/ntpns_NanoBSD_6.3.tar.bz2 or http://www.rabel.org/ntpns/ntpns_NanoBSD_7.tar.bz2 PPS input is set for pin #10 on the soekris, you can change it to your liking though (just be sure to copy the changed file to the /cfg folder) When it boots I have it run ntpdate just to get a coarse time (if it's too far off NTPns doesn't like that)... _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
