Robert Darlington wrote:
Hi Jim,
This doesnt' look right to me.
you're right.. I forgot inches/feet.. divide my 0.08 by 12..
.007 mrad..
Now we're talking big, big aperture.. instead of 2-3 inches, 2-3 feet.
I'm getting roughly 2.3 inches at 2400 feet
is 0.08 miliradians. 0.01 miliradians (1*10^-5 radians) at 2400 feet is
0.288 inches (roughly 30 caliber). Wikipedia says that to resolve 0.01
miliradians you need:
R (in radians) = lambda / diameter (of scope) (aka, Dawes Limit if you use
562nm light)
1 * 10^-5 radians = 562nm (green) / X
X= 5.62cm aperture or 2.2". This is what it comes to on paper, in
practice you'd probably need something bigger because of atmospheric
effects, lens quality, and the like.
That being said, I can't see my holes at 300 yards with my Leupold scope
with an opening greater than an inch. I can just barely make them out at
200 yards. See http://en.wikipedia.org/wiki/Angular_resolution - Also,
somebody please double check my math.
-Bob
On Tue, Nov 2, 2010 at 7:28 AM, jimlux <[email protected]> wrote:
Bob Camp wrote:
Hi
Ok, I mis-understood the question.
In my experience, you can have big buck (as in many thousands of dollars)
optics and not see .2" holes at 800 yards. The bull's eye is a *lot* bigger
than the hole the bullet made.
0.2" at 2400 ft is about 0.08 milliradian.. or 0.3 minutes of arc. Your
eye can resolve about 1 minute of arc... I'm not questioning your
experience, but it seem that even a moderate power scope should allow you to
see the holes. As I recall, the Rayleigh limit for resolution is something
like 0.7 milliradian/mm of aperture, so 10-15 mm aperture would be in the
right ballpark..
I can imagine needing more aperture than 3", though.. you're not interested
in resolving a star, but something more akin to separating dots.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
