There is an EEPROM that can be used to store parameter such as the
initial DAC voltage, position, etc. but it's not automatic. Have you
explicitly saved the position (or auto stored it) after the survey is
complete? If you don't do this then it will have to do a survey on every
startup and that takes a bit.
Ziggy
On 11/6/2010 8:14 AM, David Hopkins wrote:
Gentlemen,
A question on the Thunderbolt.
Lately every time I turn the Thunderbolt off and then on again I have
to do a cold reset.
It then takes about 10-20 minutes before it is fully operational
again. This is most unsatisfactory.
Its almost as if its lost most of its settings.
Is there some internal memory backup device that dies with age?
Any suggestions would be appreciated.
David
David G. Hopkins (VK4ZF)
CAPALABA QLD
AUSTRALIA
27.32.38S 153.12.03E
QG62OL
Skype :- davhop
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
