Magnus I will keep it in mind, in the meantime it has been approved. But once every thing has been tested I will send it to you to post all the drawings, board and code for dissemination. Thank you. How did you come out on the Rb Bert In a message dated 11/13/2010 3:42:05 P.M. Eastern Standard Time, [email protected] writes:
Dear Bert, On 11/13/2010 09:24 PM, [email protected] wrote: > > I agree with Magnus Dual Mixer is the best way to go. That is why over a > year ago I set out to develop a system that with counter can be realized for > $200. I did reach that goal and Corby tested the first pass and the second > pass with 1 E-13 results. He used his SRS counter. Richard who wrote the > code for the five PIC's has tested the counter. What is missing some one > testing the two combined. I have a total of seven systems out there some on the > condition that they get on it with in two weeks. Sad to say it has not > happened. I just send out an other kit this week, maybe we will have more luck > this time. Once a total test has been done the third set of boards will be > ordered and once tested made available for any one. It measures frequency > difference and Allan Variance with a resolution 1E-15 the five channel > counter runs off USB power and all is needed is along with the reference is a > one or ten Hz offset OCXO. Would be very nice to test. > I will not mention any names but I would like to remind you what you > promised the rest would appreciate the availability of a unit that everybody can > build and will be affordable. 200 USD is a good price for such a thing. > Attached is the picture of the second pass with HP 10514 Mixer courtesy of > Corby. There are only two SMD components! > PS I did send it with a picture attached with 113.3 K hoping my text would > not take up space but some how it ended up 160K and is on hold. I will try > again send only picture! The picture didn't make it through. If you can put it on a web-page (or send it to me and I put it on my web)and provide a link would be beneficial. Cheers, Magnus _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
