I have been a software hacker for years but have never really done too much hardware hacking. I have been looking at oxco modules, but the data sheets of various vendors do not really provide me with a good basis as to what such an oscillator would provide me. I assume its just oscillation given the given frequency. Do any of you all have any good links/resources aside from what a basic google would provide, as to how to get the data from the oscillator at a pulse-per-second rate allowing me to do some basic timing. Really, I'm just looking for some first steps in hacking on these high-precision oscillators.
Matt, Yes I'm sure many on this list have large collections information but you would need to be very specific to receive an answer, make, model, and which spec. Several projects can be found in the list archives for dividing the oxco rate to the PPS rate. Check the TAPR web site for a TADD-2 PPS divider. In general you accumulate all sorts of lab grade test equipment or make your own equipment to measure the output. The catch 22 is you need a better reference to measure a unknown device. Most start with GPSDO and a Time Interval Counter / Frequency Counter a way to log your data to process on a computer is good unless you want to go old school with pen and paper and stop watch ;-) Stanley _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
