Unfortunately, there is no way to restart the kernel without going through a BIOS re initialization.
Changing the run level restarts the init process but does not reload the kernel. On Dec 2, 2010, at 10:17 PM, [email protected] (Mike S) wrote: > Anyone familiar with Linux kernel timekeeping? > > I've recently upgraded a server to an AMD 890FX/SB850 based motherboard. > After doing so, I observed a large (in time-nut terms) inconsistency in > system timing, as seen in the rate of the system's Time Of Day clock. > > Sync'ing to a local GPS locked NTP server, I see up to an 80 ppm spread > between reboots, which I've documented at > http://www.flatsurface.com/AMD_SB850/index.html . I'm running kernel 2.6.32 > (Debian squeeze). > > I think that kernel timekeeping ("jiffies") are linked to the "8254" timer in > the SB850 south bridge, but maybe it's the HPET in the 890FX north bridge. > Anyone know how to tell which the kernel is using for timekeeping? > > Also, is it possible to restart the Linux kernel without a full reboot > (avoiding BIOS initialization), to see if it's a kernel or BIOS issue? I > don't believe a simple change of runlevel restarts the kernel from scratch. > > I haven't seen this inconsistency on previous Intel or Serverworks based > motherboards, but I've seen this behavior on 890FX/SB850 motherboards from > two different manufacturers (although I think both use Award BIOS). > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
