Hi, John,
Do you have any experience with it? Not too long ago I was in the need
to do some conducted EMC measurements in the range of 30Hz to 100MHz,
with a quite low maximum requirements, and I found that my current probe
and HP8566B combination was not good enough to conduct them (due to
filter resolution in the low side and to noise factor in the high
side...). At the end, we contracted an external laboratory for doing
these measurements usign an R&S ESU-40 measurement receiver. Do you know
how good would this unit perform as a measurement receiver?
Regards,
Javier
El 11/12/2010 04:21, John Miles escribió:
It's neat -- not a substitute for the big HP iron, but still a very capable
tool. The first few they sold were less expensive, but I think it's still a
nice piece of gear for $1K. Good bang:buck ratio.
-- john, KE5FX
-----Original Message-----
From: [email protected] [mailto:[email protected]]on
Behalf Of Geraldo Lino de Campos
Sent: Friday, December 10, 2010 5:14 PM
To: [email protected]
Subject: [time-nuts] Software defined spectrum analyzer
I found this device on the net. It seems quite capable for the price. Does
anyone have experience with it, or the previous version?
http://www.signalhound.com/
Geraldo
------------------------------------
[email protected]
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
--
------------------------------------------------------------------------
Javier Herrero EMAIL: [email protected]
Chief Technology Officer
HV Sistemas S.L. PHONE: +34 949 336 806
Los Charcones, 17 FAX: +34 949 336 792
19170 El Casar - Guadalajara - Spain WEB: http://www.hvsistemas.com
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
