Hi Do you also require precision in the ~ 1 ps range as well as resolution?
If so, that opens up a whole series of issues about: 1) How long since it was calibrated 2) Temperature and other environmental effects 3) Traceability of calibration Not a simple or cheap problem to solve. Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Josef Kölbl Sent: Tuesday, December 14, 2010 7:59 AM To: [email protected] Subject: [time-nuts] TAC/TDC I am looking for a commercial drop-in module/solution of a time-to-analog or even time-to-digital converter module with <= 1 ps resolution (device should eventually go on a printed-circuit board). Critical issues are: linearity, stability, accuracy, jitter and precision. The maximum time interval to be measured shall be <= 25 ns. Do you know of any commercial products? I will require more than 1 unit. Thanks. Josef _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
