The link didn't work, so I searched for PCI20428 and found this:
http://www.bedogmbh.de/seite5010.htm (scroll down to find the card)
Worst case you can buy a break-out box:
http://www.bedogmbh.de/seite1412.php
http://www.bedogmbh.de/pdf/22101035.pdf
I'm not affiliated with them.
Recently I saw that adapter on ePay, but I don't remember the seller, so
that is probably of no help, I'm afraid.
Btw. do you have the system software?
Adrian
Robert Atkinson schrieb:
Hi Clive,
The PCI card was not made by HP. see<
http://control.etfbl.net/mjerenja/pci20428w.pdf> for the manual. It's a
multi-purpose card so you need to know which inputs (or outputs) are used. The HP
system description may help. Otherwise you will have to get someone with the adaptor
to do a continuity check on it. Or play a guessing game. Put a 'scope on the main
unit and see it it has analogue or TTL signals and start from there.
Regards,
Robert G8RPI.
--- On Wed, 15/12/10, Clive Green<[email protected]> wrote:
From: Clive Green<[email protected]>
Subject: [time-nuts] FW: E5500 phase noise test set
To: [email protected]
Date: Wednesday, 15 December, 2010, 12:03
Subject: Fw: E5500 phase noise test set
I have recently started to put together a used E5500B phase noise test
set.
I have bought the main unit, the 70420A test set, from the USA and have
got this to work with an GPIB card. I have also bought a used PCI-20428W-1
digitizer card which the system recognises OK. My problem is that the card
needs an adapter from the 50 way connector on the card to 2 SMA coaxial
connectors which go to the test set. There is a picture of this in the
installation manual which I have attached. Attempts to get information on
this from Agilent have completely failed as they no longer use the
PCI-20428W card, and the adapter is long since obsolete.
If is has the adapter, does someone have photos of the inside of it, and/or
perhaps trace the connections between the SMA connectors and the card
connector. Once I have this information, I am sure I can make another
adapter.
Clive G3OPX/MM (soon)
[email protected]
-----Inline Attachment Follows-----
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
