Hi In the case of a $200 5370, you have to wait a while to find one. When you get it, you likely have to do some work to get it running. At the very least you will need to do a cal.
My guess is that a counter project would be very similar. There is an order and build process that happens every so often. Eventually you get a set of boards that *might* work. They still need a bit of this and that to get them running. Once running you need to do a cal. The calibrated and running counter is something you can have tomorrow (more or less). That's very different than the kit of boards. Bob On Dec 18, 2010, at 11:07 PM, jimlux wrote: > Bob Camp wrote: >> Hi >> If you are going to do a full boat implementation and work out all the >> isolation issues and packaging, the question becomes: >> Will it be better bang for the buck than a ~ $200 HP 5370? >> > > Isn't that the classic New vs Used discussion, though? Those 5370s won't be > available for $200 all the time > > The used equipment dealers charge more like $750-2k for that, depending if > it's an A or a B, or if it's calibrated, etc. The lowest price on eBay is > around $700 > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
