Ooops I see it was a update on page 204 roughly. So what are you running into as a issue. Could take offline if you would like. Regards Paul.
On Fri, Dec 24, 2010 at 9:39 AM, paul swed <[email protected]> wrote: > Odd I see the oscillator is 1 Mhz driving various ddas as they used to call > them. > Did not think a 10544 could work in one of these counters. > Must have been a later version. > Regards > Paul. > > > On Fri, Dec 24, 2010 at 7:24 AM, Dave M <[email protected]> wrote: > >> Dave M wrote: >> >>> Subject: [time-nuts] 10544 TCXO used in H/P 5245L counter >>>> >>>> I`m looking for a pdf of the schematic of the motherboard that the >>>> 10544 frequency reference plugs onto in the H/P 5245L counter. This >>>> is the one that has a 723N, and a 7490N to produce a 100KHz >>>> reference. Something is amiss with this board. >>>> Thankyou.........................................Don. >>>> >>>> >>> Don, >>> The 10544 oscillator outputs 10 MHz, so the output from the 7490 >>> would be 1MHz, not 100KHz. if that's what you're seeing, then it's >>> working properly. >>> >> >> I forgot to include a URL to the manual. It's right there on the >> HP/Agilent web site at >> http://cp.literature.agilent.com/litweb/pdf/05245-9044.pdf. >> >> >> >> David >> dgminala at mediacombb dot net >> >> >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
