Hi If you haven't re-booted yet, you may not have seen windows detect your TBolt and 3816 as mice yet. It's a simple thing to fix (disable it in device manager), but a common "next problem".
Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of J. L. Trantham Sent: Wednesday, January 19, 2011 12:07 AM To: 'Discussion of precise time and frequency measurement' Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question I am only using LH with the TBolt. I also run a Z3816A simultaneously to cross check frequencies to make sure I am not using a 'dead' reference. I monitor both on the same computer that has two serial ports and runs Win2KPro. I had previously used TBoltMon but decided to give LH a try. Quite the amazing display. It is going to take me weeks to get a handle on all that it can do. The problem I had was downloading and installing the program while the TBolt was operating and connected to COM 2. The only way I could get the program to respond was to move the TBolt to COM 1. After that, everything worked. I have not tried telling LH to switch to COM 2 then moving the TBolt back to COM 2 to see if that would work. My Symmetricom SatStat program is doing fine with the Z3816A on COM 2 so no need as best I can tell. The confusion is probably that I asked two unrelated questions in the same posting. Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of paul swed Sent: Tuesday, January 18, 2011 4:18 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question A quick question I thought lady heather was a Tbolt program only. Does it work with other GPSDP like the hp 3801 etc??? Thanks On Tue, Jan 18, 2011 at 9:20 AM, J. L. Trantham <[email protected]> wrote: > The Z3816A responded to the command nicely. I was also able to use > the > command: > *tst? > to reboot the receiver without having to turn off the Z3816A. This was > using Symmetricom SatStat v5.0. I have not tried with HP SatStat v4.2. > > Initially, the time was off by what appeared to be the leap second > value with a TFOM of 6. Now it is back to a TFOM of 3 and the time > appears correct. > > Thanks, > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]]On > Behalf Of J. L. Trantham > Sent: Tuesday, January 18, 2011 6:36 AM > To: 'Discussion of precise time and frequency measurement' > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question > > > Michael, > > Thanks for the hint. I've looked at that site a thousand times but > never found that hint until now. I'll give it a try. > > Thanks again. > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of cook michael > Sent: Tuesday, January 18, 2011 2:20 AM > To: [email protected] > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question > > > Le 18/01/2011 05:07, J. L. Trantham a écrit : > > An unrelated question. My Z3816A reports GPS time. I have looked > > but have not found a command to make it switch to UTC. Does such a > > command exist? If so, what is it? > > > The command to do the same on the Z3801A might work with this box > aswell. > > Using info from K8CU; > http://www.realhamradio.com/GPS_Frequency_Standard.htm > > Issue the command: > > :diag:gps:utc? > > If it returns 0 you are in GPS mode; if 1 you are in UTC > > Use the command: > > :diag:gps:utc 1 > > followed by > > :syst:pon > > to set it to UTC mode. Some units have to be powered off to actually > reset to UTC depending on software version. > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.872 / Virus Database: 271.1.1/3386 - Release Date: > 01/17/11 01:34:00 > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
