Dear Paul,
On 13/02/11 18:50, paul swed wrote:
Magnus it indeed does look very good.
I have re-assembled the various boards and the system locked up as normal
after the warm up period. I do indeed have a failure in the lamp control
startup crkt.
My R&S does not have a startup circuit, so I can't help on that
particular detail. I'm sure you will debug it yourself.
The reference after warm up and adjusting the c field is down in the 1x10-11
area. Anyhow I adjusted the c field and the systems not fully assembled nor
has it really been stabilized long enough. Was simply curious so I do not
think this is really a very accurate assessment. Especially since this is
time-nuts territory.
At least it proves that you are up and running at least, modulus quirks.
So next steps is to let the unit cook in or maybe I will further assemble it
and troubleshoot the startup crkt. Add the unlock counter. (A pedometer and
opto coupler) and let the system run for a long while perhaps a week or so
to see what really happens.
Sounds like a plan.
Thanks for your guidance and help Magnus. Who would have thought there was a
recovery technique for FRS-c RB references.
Happy to help. Happy to learn of your progress! Happy to hear I contribute.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
