English and fingers are not perfect and I did not check before I send it sorry about that Bert Kehren In a message dated 2/25/2011 10:50:03 A.M. Eastern Standard Time, [email protected] writes:
Pardon my ignorance, but what is a bubbler? Is that time-nut speak for a frequency doubler of some sort? Guessing at a doubler since you mention needing a 100 MHz output, and the CS2300 only has a 6-75 MHz output range. Just thinking aloud here... IF (big if ;) you are considering doubling, you might just as well use the ICS670-03. Add a flip-flop between the FBCLK and FBIN to serve as an external divide-by-two. Then you can use the x5 and x10 settings to give you an effective division factor of 10 and 20 respectively. Which in turn gives you 100 MHz output for that 5 Mhz or 10 MHz input. regards, Fred "Bert Kehren" wrote: > I need to multiply by 10 and 20, 670-2 can not multiply by 20. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
