>On Wed, Apr 20, 2011 at 9:20 PM, Mark Sims <[email protected]> wrote: > >I downloaded the HP 5372A ROM images from Dieder's site, programmed them into 27C010's, installed them on a 5372A CPU board... no joy. System does not boot. >The status lights on the CPU board flash for a while, then stop with the left three LEDs lit. > >I tried the W9 ROM size jumper in both positions (it is labeled 512K/2M) and it does the same thing. Has anybody tried to use those ROM images? > Geraldo, are you sure all the ROMs are >128Kx8 (HP part number 1818-4060)? The >5372A has 4 512Kx8 (HP part number 1818-3825) and > 4 128Kx8 (HP part number 1818-3825) ROMs.
The ROMs are for the 5373, not 5372. I didn´t check the HP part number, but checked the part id: AM23C010-200, 128Kx8. I don´t have a 5372. I used several boards of a 5372 (A3, A4, A5 and A6) to repair my 5373, that is working fine now. I do not have any information on the processor boards, however. -- ------------------------------------ Geraldo Lino de Campos [email protected] _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
