Hi, Not sure who I am reply to, but if the Agilent / HP 5342A Microwave Frequency Counter is not spoken for, I am interested in purchasing it pending a better understanding of its condition. If still available, could you please provide and description of its physical condition (don't recall seeing it in the description) and a statement on its calibration.
73 Perry KC2YMX Sent from my Verizon Wireless BlackBerry -----Original Message----- From: "J. Forster" <[email protected]> Sender: [email protected] Date: Thu, 19 May 2011 09:23:38 To: <[email protected]> Reply-to: [email protected], Discussion of precise time and frequency measurement <[email protected]> Subject: [time-nuts] [Fwd: [hp_agilent_equipment] FS: HP5342A HP8508A/85082A HP8901B/11722A works and clean] ---------------------------- Original Message ---------------------------- Subject: [hp_agilent_equipment] FS: HP5342A HP8508A/85082A HP8901B/11722A works and clean From: "Dave Meitzen" <[email protected]> Date: Thu, May 19, 2011 9:07 am To: [email protected] -------------------------------------------------------------------------- >From Dave -- AA9TT -- cell 214 244 9917 -- Dallas TX --- also trade for ham equipment Agilent / HP 5342A Microwave Frequency Counter Tested Works Fine $545 Delivered DESCRIPTION Provides automatic frequency measurement to 18GHz in a highly portable package ? Selectable input attenuation of 50 ohms and 1 Mohm ? Two input frequency ranges: 10Hz to 500MHz & 500MHz to 18GHz. Utilizes microprocessor technology Keyboard allows you to perform various math functions to allow for such things as IF offsets ? An 11-digit display is sectionalized for easy readout to 1Hz resolution THIS UNIT COMES WITH OPTS: 01= High-Stability Timebase Option 011 = Digital I/O (HP-IB) HP\Agilent 8508A Vector Voltmeter w\ 85082A (2GHz) Module No dents - very clean $2865 Delivered HP 8508A Vector Voltmeter. The 8508A Vector Voltmeter is a fully automatic tuned receiver that makes RF voltage and phase measurements easy. Its narrowband measuring technique gives a dynamic range of over 90 dB and a sensitivity of 10 µV to trace even the smallest signal. It also measures the phase difference between its two input channels with at least 0.1 degree resolution over a full +180 to -180 degree range, so they can be used for another complete set of measurements - such as electrical length, phase distortion, or impedance. With its ability to store reference and use it in later measurements means individual circuit sections can be characterized and adjusted independently. Includes one Agilent 85082A (2GHz) module installed in the system. * Frequency range: 100 kHz - 1.0 GHz * 85081B High impedance input probe module, range 100 kHz to 1 GHz * Maximum input: 2 V peak ac, ±50 Vdc * A (ref) channel minimum: 10 mV, 100 kHz to 300 kHz 1 mV, 300 kHz to 3 MHz 300 µV, 3 MHz to 1.0 GHz * B noise level: 10 µV * HP-IB interface ------------------------------------ HP8901B Modulation and power analyzer with power sensor HP11722a 150 kHz to 1300 MHz. (Power meter, Frequency, modulation, deviation, distortion, and more). 100% functional tested -- very clean low use test equipment. $1660 delivered It very accurately measures modulation and recovers the modulation signal, determines RF frequency and measures RF power. Features: * Measures AM and FM to 1% accuracy * Adjacent-channel power measurement capability * Measures RF power with power meter accuracy * Audio measurement capabilities Agilent 11722A Power Sensor, 100 kHz to 2.6 GHz * Frequency Range: 100 kHz to 2.6 GHz * Power Range: +30 dBm (1 watt) to -20 dBm (10 µW) * Input SWR (connected to an HP 8901B or 8901A): <1.15, for RF power measurements * Power sensor linearity: +2%, -4%; +30 dBm to +20 dBm. Negligible deviation, levels <+20 dBm * Calibration factors: Each HP 11722A Sensor Module is individually calibrated. The calibration factors are printed on the 11722A Sensor Module for easy reference [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/hp_agilent_equipment/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/hp_agilent_equipment/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
