bva? 1e-13 seems like a tall order to me. But I am sure others will have a better idea.
On Fri, Jul 1, 2011 at 7:33 AM, Anders Time <[email protected]> wrote: > I want go generate a stable 26MHz and 19.2MHz signal with stability in > the 1E-13 range at 1s from my 10MHz BVA. > Have been thinking about dividing the signals down to 1MHz and 100kHz > and PLL (50Hz BW or so) a reasonable stable 26MHz and 19.2MHz OCXO to > that signal. But I'm worried that the division will generate noise so > it will not be stable enough? > Have also been thinking about using a DDS to the 26MHz and 19.2MHz and > then pll, but the DDS subject seems to bee very difficult to get a > grip on. Is it possible to generate a signal with that kind of > stability in the 1s range? > Thanks > Anders > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
